Operation
46
English
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Projector will restore the latest IP configuration into
Lan Control Settings
. (*1)
3.
Press
to
highlight
DHCP
and press
/
to select
Off
.
4.
Contact your ITS administrator for information on the
Projector IP Address
,
Subnet
Mask
,
Default Gateway
, and
DNS Server
settings.
5.
Press
to select the item you want to modify and press
MODE/ENTER
.
6.
Press
/
to move the cursor and the press
/
to enter the value.
7.
To save the settings, press
MODE/ENTER
. If you do not want to save the settings,
press
MENU/EXIT
.
8.
Press
to
highlight
Apply
and press
MODE/ENTER
.
*1: If end-user want to cancel this process immediately, just press the Menu key.
Controlling the projector remotely through a web
browser
Once you have the correct IP address for the projector and the projector is on or in standby
mode, you can use any computer that is on the same local area network to control the
projector.
1.
Enter the address of the projector in the address bar of your browser and click GO.
2.
The remote network operation page opens. This page allows you to operate the
projector as if you were using the remote control or control panel on the projector.
Network State
Network
DHCP
Projector IP Address
Subnet Mask
Dedault Gateway
DNS
DNS
Apply
Disconnect
Off
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
MENU Back
i
i
i
ii
