Operation
33
English
4.
Press
to highlight
Keystone
and press
MODE/ENTER
. The
Keystone
correction
page displays.
5.
Press
to correct keystoning at the top of the
image or press
to correct keystoning at the
bottom of the image.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
•
Using the remote control
1.
Press
Zoom +/-
to display the Zoom bar.
2.
Press
Zoom +
to magnify the center of the picture. Press the
key repeatedly until the picture size is suitable for your need.
3.
Use the directional arrows (
,
,
,
) on the projector or
remote control to navigate the picture.
4.
To restore the picture to its original size, press
AUTO
. You can
also press
Zoom -
. When the key is pressed again, the picture
is further reduced until it is restored to the original size.
•
Using the OSD menu
1.
Press
MENU/EXIT
and then press
/
until the
DISPLAY
menu is highlighted.
2.
Press
to highlight
Digital Zoom
and press
MODE/ENTER
. The Zoom bar
displays.
3.
Repeat steps 2-4 in the section of
"Using the remote control"
above. Or if you are
using the projector control panel, continue to the following steps.
4.
Press
on the projector repeatedly to magnify the picture to a desired size.
5.
To navigate the picture, press
MODE/ENTER
to switch to the paning mode and
press the directional arrows (
,
,
,
) to navigate the picture.
6.
To reduce size of the picture, press
MODE/ENTER
to switch back to the zoom in/out
functionality, and press
AUTO
to restore the picture to its original size. You can also
press
repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
6
KEYSTONE
Back
MENU
