![background image](http://html1.mh-extra.com/html/benq/mp626-dlp-xga-proj-2500-lum-3000-1cr-3d-enabled-lan-rdy-brilliant-clrtm/mp626-dlp-xga-proj-2500-lum-3000-1cr-3d-enabled-lan-rdy-brilliant-clrtm_user-manual_2734685028.webp)
Operation
28
English
If you forget the password
If the password function is activated, you will be asked
to enter the five-digit password every time you turn on
the projector. If you enter the wrong password, the
password error message as pictured to the right
displays lasting for three seconds, and the message
'INPUT PASSWORD'
follows. You can retry by
entering another five-digit password, or if you did not
record the password in this manual, and you absolutely do not remember it, you can use the
password recall procedure. See
"Entering the password recall procedure" on page 28
for
details.
If you enter an incorrect password 5 times in succession, the projector will automatically
shut down in a short time.
Entering the password recall procedure
1.
Press and hold
AUTO
on the projector or remote
control for 3 seconds. The projector will display
a coded number on the screen.
2.
Write down the number and turn off your
projector.
3.
Seek help from the local BenQ service center to
decode the number. You may be required to
provide proof of purchase documentation to
verify that you are an authorized user of the
projector.
Changing the password
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Security
Settings
>
Change password
menu.
2.
Press
MODE/ENTER
. The message
'INPUT CURRENT PASSWORD'
displays.
3.
Enter the old password.
•
If the password is correct, another message
'INPUT NEW PASSWORD'
displays.
•
If the password is incorrect, the password error message displays lasting for three
seconds, and the message
'INPUT CURRENT PASSWORD'
displays for your
retry. You can press
MENU/EXIT
to cancel the change or try another password.
4.
Enter a new password.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to
you should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
5.
Confirm the new password by re-entering the new password.
6.
You have successfully assigned a new password
to the projector. Remember to enter the new
password next time the projector is started.
7.
To leave the OSD menu, press
MENU/EXIT.
Password Error
Please Try again.
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
12345678
RECALL PASSWORD
Back
MENU
Password Changed