64
Troubleshooting
Frequently asked questions (FAQ)
Imaging
The image is blurred.
Download
Resolution file
from the website (see
). Refer to
"Adjusting the Screen Resolution"
. And then select the correct resolution, refresh rate and
make adjustments based on these instructions.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Download
Resolution file
from the website (see
). Refer to
"Adjusting the Screen Resolution"
. Select the native resolution.
Pixel errors can be seen.
One of several pixels is permanently black, one or more pixels are permanently white, one
or more pixels are permanently red, green, blue or another color.
• Clean the monitor screen.
• Cycle power on-off.
• These are pixels that are permanently on or off and is a natural defect that occurs in
OLED technology.
The image has a faulty coloration.
It has a yellow, blue or pink appearance.
Go to the selected color mode from
Color Mode
. Select
Reset Color
, and then choose
YES
to reset the color settings to the factory defaults.
If the image is still not correct and the OSD also has faulty coloration, this means one of
the three primary colors is missing in the signal input. Now check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary
support.
The image is distorted, flashes or flickers.
Download
Resolution file
from the website (see
). Refer to
"Adjusting the Screen Resolution"
. And then select the correct resolution, refresh rate and
make adjustments based on these instructions.
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor
running at its native resolution. To have the optimal display performance of each type of
input sources, you can use the
Display
function to set a proper aspect ratio for the input
for details.
The image is displaced in one direction.
Download
Resolution file
from the website (see
). Refer to
"Adjusting the Screen Resolution"
. And then select the correct resolution, refresh rate and
make adjustments based on these instructions.
