Operation
28
6.
You have successfully assigned a new password
to the projector. Remember to enter the new
password next time the projector is started.
7.
To leave the OSD menu, press
MENU/EXIT.
Disabling the password function
To disable password protection, go back to the
System Setup: Advanced
>
Security
Settings > Change Security Settings
menu after opening the OSD menu system. Press
MODE/ENTER
. The message "
INPUT PASSWORD
" appears. Enter the current
password.
i. If the password is correct, the OSD menu returns to the
Security Settings
.
Press
▼
highlight
Power On Lock
and press
◄
/
►
to select
Off
. You will not
have to enter the password next time you turn on the projector.
Press
▼
to highlight
Web Control Lock
and press
◄
/
►
to select
Off
. The
Web Control Lock
function is released and the projector settings can be
change via the Projector Network System.
ii. If the password is incorrect, the password error message displays lasting for
three seconds, and the message
'INPUT PASSWORD'
displays for your retry.
You can press
MENU/EXIT
to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should you ever need to
re-activate the password function by entering the old password.
Password Changed
