Operation
26
Disabling the password function
To disable password protection, go back to the
SYSTEM SETUP: Advanced
>
Security Settings > Change Security Settings
menu after opening the OSD menu
system. Press
MODE/ENTER.
The message
“INPUT PASSWORD”
is displayed.
Enter the current password.
i. If the password is correct, the OSD menu returns to the
Security Settings
page.
Press to highlight
Power On Lock
and press / to select
Off
. You will
not have to enter the password next time when turning on the projector.
Press to highlight
Splash Screen Lock
and press / to select
Off
. The
Splash Screen
function in the
SYSTEM SETUP: Basic
menu will be available
for your change.
ii. If the password is incorrect, the password error message is displayed lasting for
three seconds, and the message
“INPUT PASSWORD”
is displayed for your
retry. You can press
MENU/EXIT
to cancel the change or try another
password.
Though the password function is disabled, you need to keep the old password in hand should you ever need to
re-activate the password function by entering the old password.
