background image

Operation

20

Operation

Starting up the projector

1.

Plug the power cord into the projector and into a 
power outlet. Turn on the power outlet switch 
(where fitted). Check that the 

POWER indicator 

light

 on the projector lights orange after power 

has been applied.

Please use the original accessories (e.g. power cord) only with the 

device to avoid possible dangers such as electric shock and fire.

2.

Press  

POWER

 or   

ON

 to start the projector. As soon as the light source 

lights up, a "

Power On Tone

" will be heard. The 

POWER indicator light

 flashes 

green and stays green when the projector is on.
(If necessary) Rotate the focus ring to adjust the image clearness.
To turn off the ring tone, see 

"Turning off the Power On/Off Ring Tone" on page 36

 

for details.

3.

If the projector is activated for the first time, 
select your OSD language following the on-
screen instructions.

4.

If you are prompted for a password, press the 
arrow keys to enter a six-digit password. See 

"Utilizing the password function" on page 24

 for 

details.

5.

Switch all of the connected equipment on.

6.

The projector will start to search for input 
signals. The current input signal being scanned 
displays in the upper left corner of the screen. If 
the projector doesn't detect a valid signal, the message “No Signal” will continue 
displaying until an input signal is found.
You can also press 

SOURCE

 on the projector or remote control to select your 

desired input signal. See 

"Switching input signal" on page 27

 for details.

If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the 

message “Out of Range”

 

displayed on a blank screen. Please change to an input signal which is compatible with 

the projector's resolution or set the input signal to a lower setting. See 

"Timing chart" on page 57

 for details.

Summary of Contents for LX60ST





























































Reviews: