Introduction
11
Remote control
1.
ON/OFF
Toggles the projector between standby
mode and on.
2.
Source selection buttons
(COMPUTER-1, COMPUTER-2,
VIDEO, S-VIDEO)
Selects an input source for display.
3.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
4.
ECO BLANK
Used to hide the screen image.
5.
Left
Decreases the projected image brightness.
6.
MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen
Display (OSD) menu item.
7.
LASER
Emits visible laser pointer light for
presentation purposes.
8.
PAGE UP/PAGE DOWN
Operates your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).
9.
FREEZE
Freezes the projected image.
10. NETWORK SETTING
Enters network setting directly.
11. TEST
Displays the test pattern.
12. SMART ECO
Displays the light source mode selection
bar.
13. NETWORK
Searches the network signal and project
it within a few seconds once available.
14. SOURCE
Displays the source selection bar.
15. AUTO
Automatically determines the best
picture timings for the displayed image.
16. Keystone/Arrow buttons (
/ Up,
/
Down)
Manually corrects distorted images
resulting from an angled projection.
17.
Right
Increases the projected image
brightness.
When the On-Screen Display (OSD)
menu is activated, the #5, #16 and #17
buttons are used as directional arrows
to select the desired menu items and to
make adjustments.
2
1
3
5
7
8
9
10
4
6
11
12
14
15
16
16
18
19
17
20
22
21
23
24
13
