English
43
Muting the sound
To temporarily turn off the sound,
y
Using the remote control
Press
MUTE
to temporarily turn off the sound. When turning off the sound, appears on the top-right
corner of screen. To turn the sound on again, press
MUTE
again.
y
Using the menus
1. Press
MENU/EXIT
and then press ◄/► until the
SYSTEM SETUP: Advanced
menu is
highlighted.
2. Press ▼ to highlight
Audio Settings
and press
MODE/ENTER
. The
Audio Settings
page
displays.
3. Highlight
Mute
and press ◄/► to select
On
.
4. To turn the sound on again, repeat Steps 1-3 and press ◄/► to select
Off
.
Adjusting the sound level
To adjust the sound level,
y
Using the remote control
Press or to select a desired sound level.
y
Using the menus
1. Repeat steps 1-2 above.
2. Press ▼ to highlight
Volume
and press ◄/► to select a desired sound level.
Adjusts the microphone’s sound level.
To adjust the microphone volume, press
MIC/VOL
(+/-) on the remote control or:
1. Repeat steps 1-2 above.
2. Press ▼ to highlight
Microphone Volume
and press ◄/► to select a desired sound level.
Power On/Off Ring Tone
1. Repeat steps 1-2 above.
2. Highlight
Power On/Off Ring Tone
and press ◄/► to select
Off
.
The only way to change Power on/off ring tone is setting On or Off here.
Setting the sound mute or changing the sound level will not affect the Power on/off ring
tone.
Using Test Pattern
This projector allows grid test pattern. This function lets you
adjust image size and focal length to ensure projected image
without distortion.
To display the test pattern, open the OSD menu and enter
SYSTEM SETUP: Advanced > Test Pattern
and press
◄/► to select
On
.
