English
38
Setting the User 1 mode
You can use one of the picture modes (except the User 1) as a starting point and customize the settings
if the current available picture modes are not suitable for your need.
1. Press
MENU/EXIT
to open the On-Screen Display (OSD) menu.
2. Go to the
PICTURE > Picture Mode
menu.
3. Press ◄/► to select User 1.
4. Press ▼ to highlight
Reference Mode
.
This function is only available when User 1 mode is selected up in the Picture Mode
sub-menu item.
5. Press ▼ to select a sub-menu item to be changed and adjust the value with ◄/►. See
“Fine-tuning
the image quality in user modes”
for details.
Fine-tuning the image quality in user modes
According to the detected signal type and selected picture mode, some of the below functions may not
be available. Based on your needs, you can make adjustments to these functions by highlighting them and
pressing ◄/► on the projector or remote control.
Adjusting Brightness
The higher the value, the brighter the image. And the lower the
setting, the darker the image. Adjust this control so the black
areas of the image appear just as black and that detail in the dark
areas is visible.
Adjusting Contrast
The higher the value, the greater the contrast. Use this to set
the peak white level after you have previously adjusted the
Brightness
setting to suit your selected input and viewing
environment.
Adjusting Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image will be
overpowering, which makes the image unrealistic.
Adjusting Tint
The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the picture
becomes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to enable
higher brightness while providing truer, more vibrant colors in picture. It enables a greater than 50 %
brightness increase in mid-tone images, which are common in video and natural scenes, so the projector
reproduces images in realistic and true colors. If you prefer images with that quality, select
On
. If you
don’t need it, select
Off
.
When
Off
is selected, the
Color Temperature
function is not available.
