![background image](http://html1.mh-extra.com/html/benq/joybook/joybook_user-manual_2733847050.webp)
Using BIOS setup
46
Advanced menu
The Advanced menu contains advanced I/O (Input/Output)
configuration settings of the system.
• Silent Boot: controls the display of the BenQ logo during
system boot.
• Enabled: The BenQ logo will be displayed during
system boot.
• Disabled: Diagnostic texts will be displayed during
system boot.
• Black: The screen will be black during system boot.
• Legacy USB Support: allows the support of legacy USB devices
during system boot and under DOS.
If you are not familiar with the items in the Advanced menu, you
are advised to keep the default.
Security menu
The Security menu contains the security settings, which
safeguard your system against unauthorized use.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
warranty documentation. Should you happen to forget or mislay
the password once set, you will be greatly inconvenienced in
gaining subsequent access to your Joybook.
• Set Supervisor Password: This set of password controls access
to the whole BIOS setup menu. It must be set before User
Password can be set. When typing the password, first make
sure Num Lock is off, and then type your password in the
entry fields and press <Enter>. Confirm your password by
typing it again and pressing <Enter>.
• Set User Password: This set of password controls access to part
of the BIOS setup menu.
• Password on boot: This item determines if a password will be
prompted during system boot. When this item is enabled, the
password is always required to boot the computer.
If Set Supervisor Password and Set User Password are both set,
you can enter either one of them during the password prompt.
To have full privileges in BIOS setup, enter Supervisor
Password.
Boot menu
The Boot menu contains the boot configuration settings of the
system. A list of devices will be displayed under Boot priority
order.
• Use < > or < > to select a device, and then press <+> to
move it up or <-> to move it down.
• To specify a device fixed or removable, press the <f> or <r>
keys.
• To exclude or include a device in the "Boot priority order" list,
press the <x> key.
• To enable or disable a device, press the <Shift> + <1> keys.
• To load the default boot sequence, press <1>, <2>, <3>, or
<4> keys.
• To select a boot device manually, press the <F9> key when the
BenQ logo appears on the screen during system startup. The
Boot Menu will appear. Use the up and down arrow keys ( ,
) to select a boot device, and then press <Enter> to confirm.
JB_R56_en.book Page 46 Tuesday, July 3, 2007 10:01 AM