![background image](http://html1.mh-extra.com/html/benq/joybook-s33-series/joybook-s33-series_user-manual_2733884051.webp)
Recovering your system using QDataTrove
47
Creating a restore point
Restore Points are the earlier states of your Joybook's system
drive created by System Protection featured in Windows Vista
System Restore. By default, restore points are created at specific
intervals and before significant system events, such as before
installing a new software.
Should your system become unstable or encounter unexpected
loss of data, you can then try to restore your system drive to its
previous state from a list of restore points.
For more information about System Protection, refer to Help
and Support in Windows Vista.
QDataTrove allows you to access Backup and Restore Center in
Windows Vista, and manually create a restore point whenever
needed. To perform the operation, follow the steps below:
1. In QDataTrove, click the Back up tab.
2. Click the
button to select Create a Restore Point.
3. To create a restore point manually, click the
button and follow the remaining on-screen instructions to
add a new restore point.
Restoring your system
The Restore feature helps to bring your Joybook back to its
factory default settings or to an earlier state. In order to restore,
you need to back up your system drive, or create a restore point
first.
Should your system become unstable or damaged, try to recover
your system with the restore solutions provided in this
functional module.
Restoring your system to factory default settings
QDataTrove allows you to restore your system drive (C: drive) to
the factory default configuration.
1. In QDataTrove, click the Restore tab.
2. Click the
button to select Full System Restore - Factory
default settings.
3. A dialog box asking whether you wish to adjust the size of
disk partition appears.
• If you select "Yes", all programs you installed or data you
saved on both the C: drive and the D: drive will be erased.
• If you select "No", all programs you installed or data you saved
on the C: drive will be erased. However, data on the D: drive
will not be affected.
4. Follow the remaining on-screen instructions to complete the
operation.
Restoring your system to your own backup
system image
QDataTrove allows you to restore your system drive (C: drive) to
a previous state with your own backup system image.
To perform this operation, a backup system image file is
required. For details about making your own backup system
image, refer to
"Backing up your system into a single file" on
page 46
or
"Backing up your system into a disc" on page 46
.
1. In QDataTrove, click the Restore tab.
2. Click the
button to select Full System Restore - Backup
Image.
3. A Open dialog box appears. Browse to select a backup system
image, and then click Open.