![background image](http://html.mh-extra.com/html/benq/il-series/il-series_user-manual_2733778045.webp)
The OSD (On-Screen Display) menu
45
Control
Setting
•
RS-232C
/
LAN
: Sets a terminal to control the display.
•
IR Passthrough
: Select it when multiple displays are connected via RS-232C
cables.
-
Primary
: Designate the display as the primary unit for remote control
operation. Only this display will be operated by the remote control.
-
Secondary
: Designate the display as the secondary unit. The display can
not be operated by the remote control, and will only receive the control
signal from the primary display via the RS-232 connection.
To go back to the default setting (
RS-232C
) for
Control Setting
, press
INFO
on the
remote control for 5 seconds.
Network
Settings
See
Network connection on page 35
for details.
Set Monitor
ID
Assigns an ID number for the current display when multiple displays are
connected.
For use when under the RS-232C control mode.
HDMI
Control
Uses the HDMI CEC (Consumer Electronics Control) industry standard
protocol to share functionality between connected devices and the display. To
transfer system commands, you need to use an HDMI cable to connect the
display to a device equipped with HDMI CEC. Select
On
in this menu and you
can operate the main functionalities on your display and the connected device
with one remote control.
Advanced
•
Auto Search
: Automatically detects available input sources.
•
Auto Adjustment
:
Automatically optimizes image display for the
VGA
input.
•
Overscan
: Turns the overscan function on or off.
•
RGB Signal
: Sets the type of signal for a piece of video equipment or PC
connected to the HDMI of the display
•
Image Retention
(
Anti Image Retention
): Automatically displays swift
moving patterns to prevent image retention on the screen.
•
OSD Rotation
: Adjusts the OSD rotation.
See product specifications for models recommended for portrait orientation. Landscape
only models operated in portrait mode may result in premature failure and will not be
covered under the warranty.
•
OSD Info Box
: When turned
On
, switching signal inputs, or changing timing,
the display will show the current input source and resolution onscreen. Select
Off
to show the information box onscreen only when you press
INFO
on the
remote control.
•
Adaptive Contrast
: Turns the
Adaptive Contrast
function on or off. This
feature enhances image contrast for dark scenes.
This feature is not available if the
Ambient Light Sensor
function is set to
On
.
•
Ambient Light Sensor
:
When turned
On
, the image brightness will adjust
automatically as the ambient lighting conditions change.