Basic operations
34
Basic operations
Turning the display on or off
Locking/unlocking the controls
You can lock/unlock the control panel to prevent unwanted or accidental operations.
• Control panel buttons
To lock/unlock the control panel buttons, press and hold
/- and
/+ on the control
panel simultaneously for 5 seconds. Once locked, the control panel buttons do not
function unless unlocked.
• Remote control functions
To lock/unlock the remote control functions, press and hold
MENU
and
/- on the
control panel for 5 seconds. Once locked, the display does not respond to any remote
control operations unless unlocked.
To lock/unlock both the control panel and remote control buttons, press
for 5
seconds, and then
ENTER
on the remote control. Once locked, the control panel and
remote control buttons do not function unless unlocked.
Switching input signals
Press the
INPUT
button or those signal selection buttons on the remote control or the
INPUT
button on the control panel to select an input signal.
Adjusting audio volume level
Press
/- or
/+ on the control panel
or
VOL+
/
VOL-
on the remote control to adjust
the volume.
To turn on or off the display, press the power button on the
display’s control panel or on the remote control.
• The display’s standby mode still consumes power. To completely cut off power supply, set the
power switch to the off position or disconnect the power cord from the power outlet.
• The display follows the VESA approved DPM Power Management function. The power
management function is an energy saving feature that automatically reduces the display’s power
consumption when the keyboard or the mouse has not been used for a fixed period.
