4. Basic Operation
BenQ HT 480W User’s Guide
15
4. Basic Operation
Turning the Power on
Zoom/Focusing
■
The Power LED shines orange when power is
applied and the power switch is in the on position.
■
Press and hold the ON key on the remote control
or the STANDBY/ON key on the projector for
ONE second to turn the projector on. The
POWER LED will flash orange while warming up,
then show a steady green.
■
" Searching…." will be displayed on the screen
before the projector identifies the input signal. This
message will remain on the screen until a valid
signal is detected.
■
If the horizontal frequency of the input signal
exceeds the range of the projector (XGA), a
message reading " Not supportive timing " will be
displayed on the screen. This message will remain
on-screen until you change the input signal.
■
Adjust the projected image size you need with the
zoom ring on the lens. To focus the image, rotate
the focus ring on the lens.
Power
Lamp
Menu
Memory
lnput
Focus
Zoom in
Zoom out
Content-e.fm Page 15 Monday, July 8, 2002 4:23 PM
