![background image](http://html1.mh-extra.com/html/benq/home-cinema-pe8720/home-cinema-pe8720_user-manual_2734520029.webp)
29
Menus
Eng
lish
Advance menu
1.
Advanced - 30 step IRIS: Adjusts the contrast ratio toward Low or High.
See page 21
for more
information.
2.
Whisper mode: This projector features a whisper mode which achieves an astonishing low 23dB of emitted
noise during operation -- the same level of noise as someone whispering in your ear. Even normal
operating noise of 25dB is little more than a whisper. To switch the whisper mode on or off, press the
e
or
f
button on the remote control or projector repeatedly. When the mode is on, the speed of color wheel is
lower to 4 times with lower brightness output.
3.
Edge Optimizing: Sharpens the edges on an image. It helps highlight the details on an image or restore
details that have been blurred. To enhance the picture edges, press the
e
or
f
button on the remote
control or projector. The higher the setting, the greater the edge performance.
4.
Clarity Control: Adjusts the picture clarity. The higher the setting, the greater the clarity.
5.
White Balance Fine Tuning: Adjusts the white color.
•
Color Temp. Info.: shows the current color temperature.
*About color temperatures:
There are many different shades that are considered to be “white” for various purposes. One of the
common methods of representing white color is known as the “color temperature”. A white color with a
low color temperature appears to be reddish white. A white color with a high color temperature appears
to have more blue in it.
•
RGB Gain... --- Adjusts the contrast levels of Red, Green, and Blue.
•
RGB Offset... --- Adjusts the brightness levels of Red, Green, and Blue.
To store Color Temperature to User 1 and 2:
i.) Open the Advanced menu and select White Balance Fine Tuning > RGB Gain, press ENTER.
ii.) Press
c
or
d
to select the item to be changed and adjust the value with
e
or
f
button.
iii.) Press EXIT to leave and save the settings.
iv.) Repeat steps ii and iii to set RGB Offset values.
v.) Select and enter “Store Color Temperature to User 1” or “Store Color Temperature to User 2” to save
the settings which are made above.
vi.) Press EXIT to leave and save the settings.
To make the color temperature higher
Set the value of Blue Gain greater, and the value of Red Gain smaller.
To make the color temperature lower
Set the value of Red Gain greater, and the value of Blue Gain smaller.
PE8720-en.book Page 29 Friday, May 13, 2005 5:19 PM