- 33 -
Attention (For writing VGA EDID only)
Note1. Before running QEDID302.exe, please press on
“PLUS”, “MINUS” and “Power”
buttons
at the same time to enter factory mode to turn
“burn in”
ON
.
a. If
“burn in” is on, please turn “burn in” off first, then, turn “Burn in”
ON
b. If
“burn in” is off, please turn “ burn in”
ON
Note2. If you don
’t enter factory mode to turn burn in ON, VGA EDID and Serial Number writing
will be failed
Note3. The above steps are for burn-in VGA EDID only. For DVI and HDMI, these steps can be
ignored.
4.2.3 EDID programming procedure:
Step 1:
Click on
“QEDID302” to run the program
Note: If “VGA” and “DVI” choose 128bytes, and “HDMI” choose 256bytes
