- 23 -
3.5 Label on product Wrong or missing
Major
3.6 Scratched or dirty but legible spec. label
Minor
3.7 GAP between LCD and front bezel is over 1.5 mm
Major
3.8 Dot/area discolor over 1mm dia. in front or over 2mm dia. in other areas
Major
3.9 Cabinet warped, sagged or bulging
＞
0.5% of surface length
Major
3.10 Cabinet warped, sagged or bulging noticeable but
＜
0.5% of surface length
Minor
3.11 Sharp stud or edge, which can cause damage not safe
Major
3.12 Finishing of piece parts will not arrived in good condition at the customer
Major
3.13 Step ( between real cover and bezel )
＞
-0.3mm , < 0.5mm
Minor
3.14 Step ( between real cover and bezel )
＞
0.5mm
Major
3.15 Wiring or fixing cord comes out of cabinet or jammed
Major
3.16 Auxiliary material used during production not removed
Major
3.17 Cabinet parts come loose during normal handling, not safe
Critical
3.18 Cabinet parts come loose during normal handling, but safe
Major
3.19 Tilt/swivel too flexible/not working
Major
3.20 Tilt/swivel stiff
Minor
3.21
Dirty front bezel and housing can’t remove
Major
3.22 Dirty front bezel and housing removable easily
Minor
3.20 Sticker or loose user control switch which will not function correctly
Major
3.21 Missing knob or switch, not safe
Critical
3.23 Missing knob or switch, but safe
Major
3.24 Poor functional user controls in mechanical
Major
3.25 Unreadable printing of user controls label
Major
3.26 Rubber foot missing
Major
3.27 LED wrong material or missing
Major
3.28 Gap between bezel and button >0.4
Major
3.29 Wrong S/N between spec. label and monitor display
Major
4
AC power and signal cable
4.1 AC power or connector not correct or damaged, not safe
Critical
4.2 AC power or connector not correct or damaged, but safe
Major
4.3 Signal cable contact pin dirty
Minor
4.4 Signal cable plug dirty or surface damaged, but safe
Minor
4.5 Cable crack
Major
4.6 Cable scratch ( wire not exposed ), or dirty
Major
4.7 AC-DC adapter no function
Minor
4.8 Signal cable contact pin dirty
Major
5
Interior of the product
5.1 Use Non-QVL ( Qualify vendor list )component
Major
5.2 Wrong parts, broken component, but safe
Major
5.3 Foreign material
Conductive (Has potential to short circuit)
Major
Non-conductive (Moveable)
Minor
5.4 Missing hardware, component or screw, stripped screw
Major
5.5 Loose hardware/screw or insufficient torque
Major
5.6 Poor wire routing, which is no concerned on EMI
Minor
5.7 Cold soldering/loose connections (Electrical)
Major
5.8 Wires and mechanical structure do not meet UL/CSA or TUV
Critical
5.9 Wrong parts, broken component, not safe
Critical
5.10 Component burn
Critical
