Using the Remote Control
16
En
gli
sh
Using the Remote Control
Power on, Power off and Standby
Switching Inputs
Turning on the display
1. After plugging the display's power cord into a wall
outlet, the display will turn on and enter standby mode
automatically. The power indicator will light up red.
2. Press the Power button on the display, or press the
(Power) button on the remote control. The display
will turn on. (The power indicator changes to green.)
Turning off the display
Press the Power button on the display, or the
(Power)
button on the remote control again, and the display will go
into standby mode. (The power indicator will turn red.)
1.Turn on all connected equipment or devices.
2. Press the INPUT button on your display, or press the
(Input) button on your remote control to display
the current selected input.
Press the button repeatedly until your desired input is dis-
played. The sequence is as follows: TV -> AV1 -> AV1-
RGB -> AV2 -> AV2-S->AV3->AV3-S->AV4->AV4-S-
>Component 1-> Component 2->PC->DVI->TV...
AV2-S, AV3-S or AV4-S will appear only when the S-
Video input signal is connected.
