manualshive.com logo in svg

BenQ CinePrime Series, User Manual

The BenQ CinePrime Series offers users an unparalleled cinematic experience. To ensure seamless operation and maximum enjoyment, owners can access the user manual for free download on our website. Unlock the full potential of your BenQ product with the comprehensive manual available at manualshive.com.

Share
Download
background image

  25

  Operation

Upgrading firmware

1.  Go to BenQ website and enter 

Product 

page

 > 

Support

 > 

Software

 to download 

the latest firmware file.

2.  Unzip the downloaded file, find and save the 

file named "update_signed.zip" to a USB flash 
drive.

3.  Plug the USB flash drive into the USB 3.0 port 

on the back of the projector.

4.  Go to the 

SYSTEM SETUP: ADVANCED

 

> 

Firmware Upgrade

 menu, and press 

OK

.

5.  Select 

Yes

 to upgrade the firmware version. 

Keep the projector on during firmware 
upgrade.

6.  When this message appears, the firmware 

upgrade is done.

SYSTEM SETUP: ADVANCED

Lamp Settings

HDMI Settings

Key Lock

Reset All Settings

ISF

Firmware Upgrade

Exit

No Signal

LED Indicator

Password

Off

On

Firmware Upgrade

Upgraded to 0.0.41

Upgrade Successfully

Summary of Contents for CinePrime Series



















































Reviews:

No comments

Related manuals for CinePrime Series

M-system MA-100 Instruction Manual preview
MA-100
Brand: M-system Pages: 3
Optoma EcoBright ZW210ST Datasheet preview
EcoBright ZW210ST
Brand: Optoma Pages: 2
Sim2 MiCO 50 User And Installation Manual preview
MiCO 50
Brand: Sim2 Pages: 277
RS V9647 Instruction Leaflet preview
V9647
Brand: RS Pages: 4
Christie DHD1052 Quick Setup Manual preview
DHD1052
Brand: Christie Pages: 158
artograph Tracer Jr User Manual preview
Tracer Jr
Brand: artograph Pages: 24
B&B Electronics IASP1P Product Information preview
IASP1P
Brand: B&B Electronics Pages: 1
Celexon HomeCinema Electric Tension screen Operation Manual preview
HomeCinema Electric Tension screen
Brand: Celexon Pages: 11
Infinite L-com SRCN-C266 User Manual preview
L-com SRCN-C266
Brand: Infinite Pages: 3
Elite Screens ezCinema Plus Series User Manual preview
ezCinema Plus Series
Brand: Elite Screens Pages: 8
Emerson Liebert Surge and Signal Protection Specifications preview
Liebert Surge and Signal Protection
Brand: Emerson Pages: 4
Emerson Liebert Precision Cooling Brochure preview
Liebert Precision Cooling
Brand: Emerson Pages: 2
Emerson PowerSure 350-500VA Quick Start Manual preview
PowerSure 350-500VA
Brand: Emerson Pages: 2
Emerson Liebert TYPE SS Specification Sheet preview
Liebert TYPE SS
Brand: Emerson Pages: 2
Emerson PowerSure PST Specifications preview
PowerSure PST
Brand: Emerson Pages: 2
Emerson PowerSure Panel TVSS Specifications preview
PowerSure Panel TVSS
Brand: Emerson Pages: 2
Wolf SDC-15 Manual preview
SDC-15
Brand: Wolf Pages: 17
Emerson PSS Surge Protector Specifications preview
PSS Surge Protector
Brand: Emerson Pages: 2

Brands by name

Popular brands

Load more brands