If the lens is dirty, use a lens brush or soft cloth to clean the lens.
Do not touch the lens with your fingers.
If a foreign substance or water gets in your camera, please turn the power off immediately and
disconnect the batteries. Next, remove the foreign substance or water and send it to the
maintenance center.
Whenever there is data in the internal memory or the external memory card, you should make
a backup copy to a computer or disc. So, you can have a backup solution if data loss occurs.
If the lens cannot retract into the camera, please replace the batteries first (usually this is
because of drained batteries). Then the lens should retract automatically. If the lens still
cannot retract, please contact your dealer.
Under no circumstances should you push the lens back manually as this may damage the
camera.
All original accessories are designed only for use with this camera model you purchased. Do
not use these accessories with other camera models or cameras of other brands to avoid
unpredictable danger or damage.
Before initial use of a memory card, always use the camera to format the card first.
Remember to slide the write-protect tab (if available) to the unlock position. Otherwise, all
data (if any) on the memory card is protected and the card cannot be edited or formatted.
Operating environment
Do not use or store your camera in the environments listed below:
Direct sunlight
Dusty places
Next to an air conditioner, electric heater or other heat sources
In a closed car that is in direct sunlight
Unstable locations
Do not use your camera outdoors when it is raining or snowing.
Do not use your camera in or near water.
The camera operating temperature is between 0 and 40 degrees Celsius. It is normal for the
operating time to be shortened when the temperature is low.
The capacity of your camera batteries will reduce each time it is charged/emptied.
Storage at too high or low temperatures will also result in a gradual capacity loss. As a result,
the operating time of your camera may be considerably reduced.
It is normal for the camera to become warm during operation, because the camera casing can
conduct heat.
It is normal for the camera to become warm during operation, because the camera
casing can conduct heat.
The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet, it
is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display malfunction,
nor will this affect the pictures you take with the camera.
The LCD monitor looks darker in strong sunlight or bright light. This is not a malfunction.
To prevent your images from being blurred while pressing the shutter button, always
hold the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to ensure
your images are properly exposed.
Summary of Contents for C1420
Page 1: ...Welcome C1420 Digital Camera User Manual ...
Page 8: ...EN 8 ...
