BenQ C1420, User Manual

Page: 13 / 37

EN-13
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied batteries with correct orientation as shown.
4. Insert an SD/SDHC memory card (Optional).
„ The camera has 32MB internal memory (23MB available for image storage), but
you can load an SD/SDHC memory card to expand the camera’s memory
capacity.
„ Be sure to format the memory card with this camera before its initial usage.
5. Close the battery/memory card cover and make sure it is locked securely.
„
To prevent valuable data from being accidentally erased from an
SD/SDHC memory card, you can slide the write protect tab (on
the side of the SD/SDHC memory card) to “LOCK”.
„
To save, edit, or erase data on an SD/SDHC memory card, you
must unlock the card
.
„
To prevent damaging of an SD/SDHC memory card, be sure to
turn off the power when inserting or removing the SD/SDHC
memory card. If inserting or removing the SD/SDHC memory card with the power on, the camera will
automatically turn off.
„
High-capacity (such as 2500 mAh) rechargeable batteries are recommended.
„
Carbon-zinc the batteries are not recommended.
„
Remove the batteries from the camera if you do not intend to use the camera for a long time.
„
If the lens cannot retract into the camera, please replace the batteries first (usually this is because of
drained batteries). Then the lens should retract automatically. (Under no circumstances should you push
the lens back manually as this may damage the camera.) If the lens still cannot retract, please contact
your dealer.
„
The AA batteries that came with the camera are not rechargeable.