BenQ 9H.L6RLA.T8X Service Manual Download Page 5

Page: 5 / 90

1. About this Manual

The purpose of Service Manual is to provide a guide line to engineers to repair different models. The appearance

and capability is introduced in this Service Manual. It is better for repair engineer to have a rough idea of this model

through reading the Service Manual. Please do pay attention to the item part of the disassembly when repair the

machine and also do the protection of panel any time. When repairing the circuit board, please follow the

requirement of RoHS and refer to the circuit diagram and repairing process that attached in the Service Manual.

The method of firmware updated, the way of using the menu and some information that may be used when

repairing are also attached in the Service Manual that provide repair engineer various choice.

1.1 Important

Only trained service personnel who are familiar with this BenQ Product shall perform service or maintenance to it.

Before performing any maintenance or service, the engineer MUST read the “Important Safety Information”.

1.2 Trademark

Summary of Contents for 9H.L6RLA.T8X



























































































Search results

Summary of Contents for 9H.L6RLA.T8X

Reviews:

Related manuals for 9H.L6RLA.T8X

Brands by name

Popular brands

BenQ 9H.L6RLA.T8X, Service Manual

Search results

Summary of Contents for 9H.L6RLA.T8X

Reviews:

Related manuals for 9H.L6RLA.T8X

Brands by name

Popular brands