BENQ Corporation
19
3.1.2.1.3. WLAN
When users choose network configuration, the submenu will pop up. Left click the mouse
on the WLAN item and the WLAN control panel will pop up.
$
Status
-
Network Adapter
You can select from a list of supporting network adapter in this field. (Please kindly select BenQ
W10 (W11) GPRS with WLAN PC Card
-
State
The current state of the driver is displayed in this screen. If the state reveals “Associated,“ it
means that the normal flow of operation is in Infrastructure mode. This shows that the PC is
already connected to access point and BSSID is also shown in the form of hex digits. At the same
time, the networking is available for the device.
In “Scanning ” state, it means that the node cannot detect the SSID to an access point within
range and is searching for an available access point. Also, if the driver failed to initiate for some
unknown reasons, this field will display an error message.
-
Network Adapter
You can see the current operation mode, Infrastructure or Ad-Hoc mode.