BENQ Corporation
20
-
Channel
This field shows the current radio channel, which is being used for an active connection.
-
Tx Rate
This field shows the current transmit rate, which is being used for an active connection.
-
Security
This field tells if you have opened your WEP security.
-
IP Address
The field shows the IP Address of the current Internet adapter.
-
Signal Strength
The Signal Strength bar graph only becomes active, when the node is in Infrastructure Mode.
This bar graph shows normalized signal strength as reported by the radio, averaged over all
frames over 100 bytes long, which are received from the Access Point.
Status information about the radio link is displayed in this tab. Detailed description should be
placed in this field.
-
Link Quality
This field reveals the quality of the current connection. Only when the node is in Infrastructure
Mode does the Link Quality bar graph become active. The bar graph displays the link quality
between the node and its Access Point. Over the bar graph, a label summarizes the quality of the
link. As a result, the Link Quality is a very good indicator of receiving and transmitting errors
over the radio.
-
RF Enable/ Disable
This button is to enable or disable WLAN function. If “RF Enable”, the WLAN will be enable
and connect to Internet thought WLAN AP.
-
IP Renew
Once you select the button, your IP address will be renewed. While this function is working,
the Internet connection will be temporary stopped. The Internet connection will be back after
successfully getting connection with ISP provider.