Tebevert III_120 (R1_07) © Benning Power Electronics 2007
Specifications are subject to change without notice
Key Features
TEBEVERT III MODULAR
5-25 kVA INVERTER SYSTEM
The TEBEVERT III Modular Inverter System is designed
to address the critical AC powering requirements of
Industrial and Utility applications. The TEBEVERT III
Modular Inverter System can be scaled in 5 kVA
increments up to 25 kVA (non-redundant). Unlike
conventional stand alone inverters, these parallel
operating inverters can also be scaled to operate with
N+1 redundancy. N+1 redundancy insures optimal
availability for your critical load applications. If an
inverter failure should ever occur, the faulty inverter
module will automatically be removed from the output
bus before a disruption in the output is seen by the
critical load. In this mode of operation, a failure of one
inverter will not effect the operation of your critical load.
Since all units are designed for “hot swap” replacement,
a faulty module can easily be unplugged and replaced
to maintain power to your critical load.
Hot Swap 5 kVA Inverter Modules
Hot Swap Static Switch Module
Supports High Inrush Current Loads
High Efficiency Operation, Lowers Operating Costs
Low Distortion Output Voltage
Integrated Maintenance Bypass Switch
Meets EN 55022 Class B Requirements
Automatic Master-Slave Operation
Up to Five Inverter Modules Can Be Paralleled As Load
Increases
No Single Points Of Failure
User Friendly Display Of Operating Mode
Optional—Seismic Zone 4 Certified
Optional—Internal AC Load Distribution Circuit Breakers
120VDC Tebevert III
System
