SJ-PM-TF-Luna A01
Benewake (Beijing) Co. Ltd.
Page13
distance (Dist), effective data points per second (Effective Points) and signal strength (Strength) will be
displayed in area “
⑥
REAL TIME DATA” below.
Figure 5: PC software Interface and Display
Notes:
a) If no data is available in area “
④
TIME LINE CHART”, please check the line connection and
line sequence. When TF-Luna is successfully powered on, there will be a red indicator light inside
transmitting lens viewing from the front.
b) If the user want the TF-Luna output in the Pixhawk format, please select “
③
Pix Mode” at first,
otherwise area “
④
TIME LINE CHART” will not output the right data image normally. After Pix
Mode is checked, the unit of distance will be changed into m automatically.
c) The value of distance output Dist may vary with the output unit, which is cm by default. If the
unit of distance is changed to the unit-mm with specific command, and the PC software will be
unable to identify it, and so the unit of “
④
TIME LINE CHART” will still be cm. For example,
the actual TF-Luna measurement is 1m, the distance value of TF-Luna is 1000 in mm, the value
read by the PC software also is 1000, but the unit will not change and still display cm.
⑤
④
①
②
