background image

 106 

146876
Index F

11.1   TELEVISION

General points

- The television is powered by AC provided by the DC/AC invertor which is powered by the service batteries. The inverter 
has an ON  /  OFF button.

- A circuit-breaker protects the circuit.

- Pre-cabling for the aerial is already installed on the boat.

Starting up

- First turn on the circuit breaker, then switch on the TV. 

- The transformer is switched on and off automatically when you turn on or off the breaker.

Mechanism for raising/lowering the TV

- The equipment can be activated while underway.

Control

Television - Saloon

- The stowage unit opening and closing 

mechanism motor is very powerful. Please do 
not obstruct the movement of the TV, especially 
when stowing it in its compartment. Beware of 
the risk of trapping a part of your body, 
especially the hands.

- Keep children away when handling 

mechanisms.

Audio-visual equipment

Summary of Contents for OCEANIS 55















































































































































































































































Reviews: