11/6/2006
8:54 AM
Oceanis 351
Rev. 00
56
13.6. INTAKE & DISCHARGE THRUHULLS
13.6.1.
General Description
.
This is used for draining the bilge, shower sumps, icebox and supplying and flushing
out the heads. All these supply and flushing points have 1/4-turn valves, which must
be opened only during use. The quarter-turn valve is open when the lever is in line
with the pipe, and closed when it is at right angles.
13.6.2.
Safety - Maintenance.
Take special care to see that these valves are well-maintained, have a good seal and
work smoothly. Have a wooden tapered plug, of correct diameter at hand, so that they
can be plugged on the outside if, for instance, a seized valve has to be dismantled, or
lubricated.
After hot water has been run through a pipe for the first time, check the tightness of
all the clamps.
NOTE:
These recommendations also apply to the cooling system of the inboard engine, if
your boat has one.
13.6.3.
Thru Hull Drawing
Summary of Contents for Oceanis 351
