11/6/2006
9:02 AM
Oceanis 351
Rev. 00
86
13.14.
RIGGING
13.14.1.
General Description
The rig consists of a mast and boom held up and tensioned by the standing rigging. The standing
rigging on your Oceanis is discontinuous. This style of rigging has a turnbuckle assembly at the
lower spreader tips to attach the upper cap shrouds (V2/D3's) and upper intermediates (D2's) to
the lower cap shrouds (V1's) This arrangement saves weight aloft by eliminating extra shrouds.
The sails are attached to the mast, boom and genoa furler. The sails are shaped and controlled by
the running rigging.
1. Upper Cap Shroud (D3/V2)
2. Intermediate Shroud (D2)
3. Spreader Tip Turnbuckles)
4. Spreader Tip
5. Backstays
6. Lower Cap Shroud (V1)
7..Aft Lowers Shroud (D1)
8. Fwd Lowers Shroud (D1
9. Chainplate & Turnbuckles
10. Masthead
11. Genoa Furling Tubes
12. Upper Spreaders
13. Lower Spreaders
14. Furling Drum & Forestay
Cainplate Below Deck
Summary of Contents for Oceanis 351
