Operation Manual
EL512.256-H3 Series Display
Beneq Oy
Olarinluoma 9
Tel. +358 9 7599 530
VAT ID FI19563372
FI-02200 Espoo
Fax +358 9 7599 5310
www.beneq.com
Finland
www.lumineq.com
Date: February 13, 2017
Document number: ED000818B
Page | 7
Table 3. PS1
Position name
Function
1 SELFTST
Self-test function is selected if the SELFTEST jumper is OFF. In self-
test, the input video data at VID and TVID inputs are displayed
asynchronously without any other input signals.
2 DCONFIG
The two-bits-parallel mode is selected if this jumper is OFF (see
page 8).
3 reserved
Reserved, do not insert jumper.
4 reserved
Reserved, do not insert jumper.
When shipped from the factory, the jumpers PS1/1 and 2 are set.
3.8
Input specifications
Table 4. Input specifications
Parameter
Symbol
Min.
Typ.
Max.
Absolute min./max.
Logic input HIGH
2 V
V
cc1
+ 0.5 V abs. max.
Logic input LOW
0.8 V
-0.5 V abs. min.
Logic supply voltage
V
cc1
4.75 V
5.0 V
5.25 V 6 V abs. max.
Logic supply current at
5 V
I
cc1
—
—
0.2 A
Display Supply voltage
V
cc2
11 V
—
30 V
33 V abs. max.
Supply current at 12 V
I
cc2
0.5 A
0.9 A
Supply current at 12 V
(LOWPWR)
I
cc2
0.3 A
0.5 A
Power consumption 5
V/12 V
6 W
12 W
Power consumption 5
V/12 V (LOWPWR)
4 W
7 W
Operating conditions: Frame rate 70 Hz, ambient temperature 25 °C.
NOTE:
Absolute maximum ratings are those values beyond which damage to the device may
occur. The minimum and maximum specifications in this Operations Manual should be met,
without exception, to ensure the long-term reliability of the display. Beneq does not
recommend operation of the display outside these specifications.
