Operation Manual
EL320.240-FA3 Display
Beneq Oy
Olarinluoma 9
Tel. +358 9 7599 530
VAT ID FI19563372
FI-02200 Espoo
Fax +358 9 7599 5310
www.beneq.com
Finland
www.lumineq.com
Date: February 13, 2017
Document number: ED000813B
Page | 10
3.4
Power
The supply voltage and power requirements are shown in the table below. The power will
vary greatly depending on the number of pixels lit and the chosen luminance level (see graph
below.) Power levels will vary up to +/-15% from display to display due to brightness
variation.
Table 1. Supply voltage and power requirements
Parameter
Minimum
Typical
Maximum
Abs
max
Display supply voltage, V
H
8 V
12 V
18 V
Supply current, with V
H
= 8 V
0.59 A
1.16 A
1.44 A
Supply current, with V
H
= 12 V
0.39 A
0.78 A
0.96 A
Power consumption @ maximum
luminance (LUM0=LUM1=0)
4.7 W
9.3 W
11.5 W
Power consumption @ minimum
luminance (LUM0=0, LUM1 =1)
3.1W
6 W
Quiescent power consumption
(SHUTDOWN = 1)
0.5 W
Note:
1) Maximum power condition: 80% of pixels lit (yellow) per row
2) Abs Max power: 80% of pixels lit (yellow) per row, worst case display sample
2) Typical power: pattern with 10% of pixels lit (yellow) per row, typical display
3) All power numbers are for LUMA open (no analog dimming)
