116
FARO ANTERIORE
HEADLIGHT
PHARE AVANT
SCHEINWERFER
FAROL DELANTERO
FARO ANTERIORE
Regolazione fascio luminoso
Per effettuare la corretta regolazione del fascio luminoso
proiettato dal faro anteriore, posiziona il veicolo a circa
10 metri di distanza da una parete verticale su un terreno
perfettamente piano,
Accendi il faro anteriore, siediti sul veicolo in posizione di
guida e controlla che il limite superiore del fascio lumino
so proiettato sulla parete verticale sia inferiore di circa
1/10 rispetto all'asse orizzontale dei fari. Se il fascio lumi
noso non è conforme a questa indicazione, esegui la
regolazione agendo sulla vite 1 (Fig.1) fissata sul corpo
faro.
HEADLIGHT
Adjusting the headlight beam
To adjust the headlight beam, position the vehicle on
perfectly level ground, about 10 meters from a vertical
wall.
Switch on the headlight, sit on the vehicle in riding
position and check that the upper edge of the light
beam projected onto the vertical wall is approximately
1/10 lower than the headlight horizontal axis. If the
headlight beam does not comply with the above
indications, adjust it by means of the screw 1 (Fig.1)
fixed to the headlight body .
MANUTENZIONE
MAINTENANCE
Fig. 2
1
Fig. 1
Summary of Contents for Velvet
