Benelli Classic, User Manual

Page: 18 / 28

15
Ⅱ
-3-3. Structure Diagram of Charger
Ⅱ
-3-4. Method of Application
1.1 When charging, connect output plug
③
of the charger to charging port
⑤
of the battery unit and connect transfer
port
②
to
④
. Then connect attaching plug
①
to indoor power.
1.2 Charger adopts smart regenerative charging with constant current and voltage. According to different depths of
discharge, battery can be fully charged within 4-6 hours. Although charger will stop working when battery is fully charged, it
is suggested to take off the charger. When battery is fully charged, the attaching plug should be first torn off, then pull the
output plug of the charger.
1.3 Attaching plug of the charger should be pulled out when the charger is not used or the charging action is done.
1.4.1 “Charging” Indicator Light. When it is normally charged, the charging indictor light is “red”. When the light is “green”,
it represents the battery is charged and can be put into use.
Ⅱ
-3-5. Maintenance & Attentions :
2.1 Charger should be used with designated battery strictly according to requirements. It is forbidden to charge
non-original battery with this charger.
2.2 Charger is dangerous due to the high voltage it contains. If any faults or failures are found, please contact the dealer
or the manufacturer for help. User or non-professional servicemen of the Company are forbidden to open the charger.
2.3 Charger and battery should be in indoor environment with good ventilation and heat dissipation when charging.
Places within 1m around battery and charger should be free of inflammables. Never use the charger in the environment
which is with moist, high temperature, inflammables and explosive gas.
2.4 Never take the charger along with the vehicle so as to avoid damage caused by vibration.
2.5 Carefully read the contents before application. Manufacturer assumes no liability or responsibility for any damages
caused by misuse of abnormal operation.
Ⅱ
-4. Technical Data & Structure of Battery
Ⅱ
-4-1. Technical Data
Specification
Data
36V 24V
Rated Voltage
36V 24V
Charging Voltage
40.15V±1% 31.5V±1%
Charging Current 2.0A±5% 2.0A±5%
Maximum
Discharging Current
2C(C is battery capacity)