Benelli Classic, User Manual

Page: 13 / 28

10
Figure 1 Figure 2
Figure 3
3. Cushion with Shock Absorption/ How to adjust soft or hard effect of shock absorption Rotate to loosen the bolt of seat
post clamp and pull the whole seat post out according to Article 2. Rotate the bolt with 8mm internal hexagonal wrench
anticlockwise to make the shock absorption softer and clockwise to make it harder.
I-6. Tyre
1. Check whether rim is deflected or loosened and whether spoke is loosened or broken before riding. If any unusual
condition, ask professional technician for adjustment or change.
2. Please change the tyre if cover tyre grain is worn and torn.
3. Please guarantee proper PSI. When inflating, please take nominal value of cover tyre as reference. Never inflate over the
pressure or under the pressure.
Caution: Please make sure the contact area of tyre and ground should not be less than 10cm while riding.
I-7. Disassembly of Elastic Band on Rear Rack