Benelli BN125 2018 Owner'S Manual Download Page 17

Page: 17 / 75

3 - 1

Instrument and control functions

Key

The bike is supplied with 2 keys for:

- Opening the fuel cap

- Steering lock

- Ignition

- Opening the saddle

NOTICE

• Do not submerse any key in water.

• Do not expose any key to excessi-

vely high temperatures.

• Do not place heavy items on any

key.

• Do not grind any key or alter its

shape.

• Do not disassemble the plastic

part of any key.

• Always keep duplicate keys sepa-

rately from the bike.

Main switch/steering lock

The main switch/steering lock controls

the ignition and lighting systems, and is

used to lock the steering.

The various positions are described be-

low.

(on)

All electrical circuits are supplied with

power.

The meter lighting, taillight, license plate

light and auxiliary lights come on, and the

engine can be started. The key cannot be

removed.

TIP

The headlights come on automatically

when the engine is started and stay on

until the key is turned to .

(off)

All electrical systems are off.

The key can be removed.

WARNING

Never turn the key to “ ” or “ ” while

the vehicle is moving. Otherwise the

electrical systems will be switched off,

which may result in loss of control or an

accident.

(lock)

The steering is locked and all electrical

systems are off. The key can be removed.

NOTE

.............................................................................................................................................................................................................

MUMBN125MY17.indb 1

05/04/2018 14:26:53

Summary of Contents for BN125 2018












































































Search results

Summary of Contents for BN125 2018

Reviews:

Related manuals for BN125 2018

Brands by name

Popular brands

Benelli BN125 2018, Owner'S Manual

Search results

Summary of Contents for BN125 2018

Reviews:

Related manuals for BN125 2018

Brands by name

Popular brands