Benelli BN125 2018 Owner'S Manual Download Page 60

Page: 60 / 75

6 - 22

Periodic maintenance and adjustment

2. Wipe the drive chain dry.

3. Thoroughly lubricate the drive chain

with a special O-ring chain lubricant.

NOTICE

Do not use engine oil or any other lubri-

cants for the drive chain, as they may

contain substances that could damage

the O-rings.

Checking and lubricating the cables

The operation of all control cables and the

condition of the cables should be checked

before each ride, and the cables and cable

ends should be lubricated if necessary.

If a cable is damaged or does not move

smoothly, have a Benelli dealer check or

replace it.

WARNING

Damage to the outer housing of cables

may result in internal rusting and cause

interference with cable movement.

Replace damaged cables as soon as

possible to prevent unsafe conditions.

Checking and lubricating the

throttle grip and cable

The operation of the throttle grip should

be checked before each ride. In addition,

the cable should be lubricated by a Benelli

dealer at the intervals specified in the pe-

riodic maintenance chart.

The throttle cable is equipped with a rub-

ber cover. Make sure that the cover is se-

curely installed. Even though the cover is

installed correctly, it does not completely

protect the cable from water entry.

Therefore, use care not to pour water di-

rectly onto the cover or cable when wa-

shing the vehicle. If the cable or cover be-

comes dirty, wipe clean with a cloth.

MUMBN125MY17.indb 22

05/04/2018 14:27:03

Summary of Contents for BN125 2018












































































Search results

Summary of Contents for BN125 2018

Reviews:

Related manuals for BN125 2018

Brands by name

Popular brands

Benelli BN125 2018, Owner'S Manual

Search results

Summary of Contents for BN125 2018

Reviews:

Related manuals for BN125 2018

Brands by name

Popular brands