Quatra™ Full-Rise Scissor Lift
34
P/N 5900085 — Rev. A1 — October 2019
To connect the Power Unit
:
1.
Open the front doors of the Console, if they are currently in place.
For the Raise and Lower Buttons on the Console, the wiring comes from the factory connected to
the appropriate Button.
2.
For the connection to the hydraulic system, the Power Unit should already be connected to the
Valve Block.
See
3.
For the Power Source, have your Electrician locate the Pigtail coming out of the Electrical Box,
open the Electrical Box, remove the Pigtail, and then wire a Power Cord (with appropriate Plug)
inside
the Electrical Box.
The Power Cord and Plug are
not
supplied with the Lift.
Refer to
for proper wiring information.
⚠
DANGER
All wiring
must
be performed by a licensed, certified Electrician. If someone who is
not a certified Electrician attempts these tasks, they could be electrocuted, resulting
in serious injury or death. Do not perform
any
maintenance or installation on the Lift
without first making sure that main electrical power has been disconnected from
the Lift and
cannot
be re-energized until all procedures are complete.
Important electrical information:
•
Improper electrical installation can damage the Power Unit Motor; this damage is not covered
under warranty.
•
Use a separate circuit breaker for each Power Unit.
•
Protect each circuit with a time-delay fuse or circuit breaker. For a 220 VAC, single phase circuit,
use a 25 amp or greater fuse. For a 380 VAC, use a 15 amp or greater fuse.
4.
For the Hydraulic Fluid Reservoir, you need to fill it with approved Hydraulic Fluid.
The Power Unit’s Hydraulic Fluid Reservoir must be filled with 8.5 gallons / ~32 liters of Hydraulic
Fluid or automatic transmission fluid before you begin operation. When you receive it, the reservoir
is empty; the Power Unit will not work correctly until it is filled with approved fluids.
Approved Hydraulic Fluids are any general purpose ISO-32, ISO-46, or ISO-68 hydraulic oil or
approved automatic transmission fluids such as Dexron III, Dexron VI, Mercon V, Mercon LV, Shell
Tellus S4 / S3 / S2, or any synthetic multi-vehicle automatic transmission fluid.
Summary of Contents for Quatra XR-12000L
