HDS-14LSX / HDS-14LSXE Lifts
61
P/N 5900162 — April 2018 — Rev. F3
Operation
This section describes how to operate your Lift.
Safety Considerations
Do the following every time
before
you raise a vehicle on your Lift:
•
Check the Lift
. Walk all the way around the Lift, checking for any missing, heavily worn, or
damaged parts. Do not operate the Lift if you find any issues; instead, take it out of service, then
contact your dealer, email
or call
(800) 253-2363
.
•
Check the area
. Keep the area around and under the Lift clean and free of obstructions;
anything that could cause a problem. Do not forget to check
above
the Lift. If you find an
obstruction, move it out of the way. If you find any other issues, resolve them before using the Lift.
Do not allow any people or animals within 30 feet of the Lift while it is in motion.
•
Check the operators
. Make sure everyone who is going to operate the Lift has been trained in
its use, has read the labels on the unit, and has read the manual. Only the operator at the Controls
should be within 30 feet of the Lift when it is in motion.
Do not allow children to operate the Lift. Do not allow anyone under the influence of drugs, alcohol,
or medication to operate the Lift. Do not allow any unauthorized personnel to operate the Lift.
•
Check for safety
. Make sure everyone who is going to be walking near the Lift is aware of its
presence and takes appropriate safety measures. Only put vehicles on the Runways.
When raising a vehicle, do not leave it until it is engaged on a Safety Lock. When lowering the Lift,
do not leave it until it is on the ground.
•
Check the vehicle
. Never exceed the Lift’s weight rating. Do not allow people inside a vehicle
you are going to raise. Make sure the vehicle is not overbalanced on either end or either side.
Using the Controls
The Controls for the Lift include:
•
Up button
. Press and hold to raise the Runways. Located near the top of the Power Unit.
To put Runways onto a Safety Lock position
: Raise the Runways a little above where you
want them, then press and hold the Lowering Handle to back the Runways down onto the Safety
Locks position (do not press and hold the pushbutton on the Pushbutton Air Valve). When the
Runways stop going down, they are engaged on a Safety Lock.
Before leaving the Lift, make sure all four corners are engaged on their Safety Locks.
•
Lowering Handle
. Press and hold to lower the Runways. Located in the middle of the Power
Unit, the Lowering Handle is long and has a ball at the end.
To lower raised Runways down to the ground
:
press and hold
the pushbutton on the
Pushbutton Air Valve first, then
press and hold
the Lowering Handle.
Watch the Runways as they go down to make sure they are coming down evenly. If they are not,
stop lowering the Lift and troubleshoot the problem.
⚠
WARNING:
Only leave your Lift either engaged on a Safety Lock position or fully lowered.
Summary of Contents for HDS-14LSX
