BendPak HDS-14LSX, Hardware Installation And Operation Manual

Page: 10 / 80

HDS-14LSX / HDS-14LSXE Lifts
10
P/N 5900162 — April 2018 — Rev. F3
Model HDS-14LSX HDS-14LSXE
Lifting capacity 14,000 lbs / 6,350 kg
Maximum capacity front axle 7,000 lbs / 3,175 kg
Maximum capacity rear axle 7,000 lbs / 3,175 kg
a
Total width
130" / 3,304 mm
b
Outside Posts length
213"/ 5,408 mm 243"/ 6,170 mm
c
Total length (includes ramps)
241.5" / 6,132 mm 271.5" / 6,894 mm
d
Post height
92" / 2,338 mm
e
Runway thickness
7.5" / 192 mm
f
Maximum rise
70" / 1,778 mm
g
Maximum lifting height
77.5" / 1,970 mm
h
Distance between Posts
120" / 3,050 mm
i
Runway width
20" / 508 mm
j
Width between Runways, 1 min.
37.5" / 953 mm
j
Width between Runways, 1 max.
51.75" / 1,314 mm
k
Runway length
199" / 16.5 feet / 5,054 mm 229" / 19 feet / 5,816 mm
l
Min 4-wheel alignment 2
89" / 2,261 mm
m
Max 4-wheel alignment 2
156" / 3,962 mm
n
Max 2-wheel alignment 2
182" / 4,623 mm 212" / 5,385 mm
Min. wheelbase @ rated capacity 3
140" / 3,556 mm 165" / 4,191 mm
Min. wheelbase @ 75 capacity 3
120" / 3,048 mm 140" / 3,556 mm
Min. wheelbase @ 50 capacity 3
100" / 2,540 mm 115" / 2,921 mm
Min. wheelbase @ 25 capacity 3
80" / 2,032 mm 95" / 2,413 mm
Locking positions 15, spaced every 4" / 102 mm
Lifting time 60 seconds
Motor 4
220 VAC, 60 Hz, 1 Ph
1
May be limited if you are using Rolling Bridge Jacks.
2
Can vary depending on wheel size.
3
The Lift supports less weight than its rated capacity when the vehicle’s wheelbase is shorter; this is
because the wheels of such a vehicle are closer to the middle of the Runways, where there is less
strength. For example, the maximum weight allowed on the Lift for a vehicle with a wheelbase of
100" is 50 percent of the Lift’s rated capacity (or 7,000 lbs when the rated capacity is 14,000 lbs).
4 Special voltages available on request.
Specifications subject to change without notice.