BendPak HD-7ZM, Installation And Operation Manual

Page: 6 / 56

6
1. Carefully remove the crating and packing
materials.
CAUTION! Be careful when cutting steel
banding material as items may become loose and fall
causing personal harm or injury.
2. Check the voltage, phase and proper amperage
requirements for the motor shown on the motor plate.
Wiring should be performed by a certified electrician only.
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions entirely!
IMPORTANT NOTICE
Do not attempt to install this lift if you have never been trained on basic automotive lift installation procedures.
Never attempt to lift components without proper lifting tools such as forklift or cranes.
Stay clear of any moving parts that can fall and cause injury.
INTRODUCTION
1.
READ AND UNDERSTAND
all safety warning
procedures before operating lift.
2.
KEEP HANDS AND FEET CLEAR
. Remove hands
and feet from any moving parts. Keep feet clear of lift when
lowering. Avoid pinch points.
3.
KEEP WORK AREA CLEAN
. Cluttered work areas
invite injuries.
4. Consider work area environment. Do not expose equip-
ment to rain.
DO NOT
use in damp or wet locations. Keep
area well lighted.
5.
ONLY TRAINED OPERATORS
should operate this lift.
All non-trained personnel should be kept away from work
area. Never let
non-trained personnel come in contact with,
or operate lift.
6.
USE LIFT CORRECTLY
. Use lift in the proper manner.
Never use lifting adapters other than what is approved by the
manufacturer.
7.
DO NOT
override self-closing lift controls.
8.
REMAIN CLEAR
of lift when raising or lowering vehicle.
9.
CLEAR AREA
if vehicle is in danger of falling.
10.
ALWAYS ENSURE
that the safeties are engaged before
any attempt is made to work on or near vehicle.
11.
DRESS PROPERLY
. Non-skid steel-toe footwear is
recommended when operating lift.
12.
GUARD AGAINST ELECTRIC SHOCK
.
This lift must be grounded while in use to
protect the operator from electric shock. Never
connect the green power cord wire to a live
terminal. This is for ground only.
13.
DANGER!
The power unit used on
this lift contains high voltage. Disconnect
power at the receptacle before performing
any electrical repairs. Secure plug so that
it cannot be accidentally plugged in during
service.
14. WARNING! RISK OF EXPLOSION . This
equipment has internal arcing or sparking
parts which should not be exposed to flam-
mable vapors. This machine should not be
located in a recessed area or below floor level.
15. MAINTAIN WITH CARE . Keep lift clean for bet-
ter and safer performance. Follow manual for
proper lubrication and maintenance instructions. Keep control
handles and/or buttons dry, clean and free from grease and
oil.
16.
STAY ALERT . Watch what you are doing. Use common
sense. Be aware.
18. CHECK FOR DAMAGED PARTS . Check for alignment
of moving parts, breakage of parts or any condition that may
affect its operation. Do not use lift if any component is broken
or damaged.
18. NEVER remove safety related components from the lift.
Do not use lift if safety related components are damaged
or missing.
19. Keep hair, loose clothing, fingers, and all parts of body
away from moving parts
20. Use only as described in this manual. Use only
manufacturer’s recommended attachments
21. ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses only have impact resistant lenses, they are not
safety glasses
SAVE THESE INSTRUCTIONS