BendPak 5175151, Service Manual

Page: 22 / 25

MDS-6 Series Product Decal Positioning
A
B
F
C
G H
D
I
E
Safety Instructions
: If attachments, accessories, or configuration-modifying components that are
located in the load path affect operation of the lift, affect the lift electrical listing, or affect intended
vehicle accommodation are used on this lift and, if they are not certified for use on this lift, then the
certification of this lift shall become null and void. Contact the participant for information pertaining
to certified attachments, accessories, or configuration-modifying components.
BendPak lifts are supplied with concrete fasteners meeting the criteria as prescribed by ASTM E488/
E488M-18. Lift buyers are responsible for any special regional, structural, and/or seismic anchoring
requirements specified by any other agencies and/or codes such as the Uniform Building Code (UBC)
and/or International Building Code (IBC).
The manufacture, use, sale, or import of this product may be subject to one or more United States
patents, or pending applications, owned by
BendPak Inc.
1645 Lemonwood Dr.
Santa Paula, CA USA
www.BendPak.com
LIFT TYPE: Surface Mount MANUFACTURER: BendPak. See data plate for product details
POWER: Electric/Hydraulic INSTALLATION: See manual or contact factory
Do Not Remove Engineered by BendPak Inc., USA Made in China
PN 5905940
Product_Data_Label_5905940-New.pdf:
Size: 4.5”W x 2.75”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No gloss)
Print Process: Offset Lithography - 200 line-screen
or 300 p.p.i. for digital
Lamination: Clear laminate non-glare medium matte
over-laminate (No gloss) for abrasion, chemical and
ultra violet protection.
BendPak_Cylinder_Decal_New.pdf:
Material: Clear Adhesive PET
Size: 16”W x 3”H
Thickness: 2 Mil
Finish: Matte Overlaminate (No gloss)
Ink: U.V. protected, Opaque White
Print Process: Silk Screen, 85 line-screen
(Yellow color in file represents what should
be clear PET material and SHOULD NOT print as Yellow ink. White area in file
represents Opaque White ink.)
Lamination: Clear laminate non-glare medium matte over-laminate (No gloss) for abra-
sion, chemical and ultra violet protection.
MDS-6EXT_Tesla_Capacity_Label_ENG-FRE.pdf:
Size: 10”W x 2”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No gloss)
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear laminate non-glare medium matte over-laminate (No gloss) for abra-
sion, chemical and ultra violet protection.
Caution_Capacity_Scissor_Lift_FRE-
ENG-5905307.pdf:
Size: 5.25”W x 2”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No gloss)
Print Process: Offset Lithography - 200 line-screen or
300 p.p.i. for digital
Lamination: Clear laminate non-glare medium matte
over-laminate (No gloss) for abrasion, chemical and
ultra violet protection.
6000 LBS/2722 KG
PN 5905308
TOTAL LIFT CAPACITY / CAPACITÉ DE LEVAGE TOTALE
Maximum load on scissor lifts
should NOT exceed 3,000 pounds
per side. Always center the load
evenly. NEVER attempt to work on
or near a vehicle when it is raised
on the scissors unless the safety
latches are engaged on each
scissor unit.
Charge maximale sur les élévateurs
à ciseaux ne doit PAS dépasser 1361
kilogrammes par côté. Centrez toujours la
charge uniformément. N’essayez JAMAIS
de travailler sur ou à proximité d’un
véhicule lorsqu’il est relevé sur les ciseaux
à moins que la sécurité les verrous sont
engagés sur chaque unité de ciseaux.
CAUTION MISE EN GARDE
P/N 5905307
Lube_Label.pdf: Pinch_Point_Label.pdf:
Clear PET material and
SHOULD NOT print as Yellow
Scissor_Cylinder_Warning-Red_FRE-
ENG-5905176.pdf:
Size: 3”W x 5.25”H
Material: White Vinyl Pressure Sensitive
Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No gloss)
Print Process: Offset Lithography - 200
line-screen or 300 p.p.i. for digital
Lamination: Clear laminate non-glare
medium matte over-laminate (No gloss)
for abrasion, chemical and ultra violet
protection.
WARNING
VERY IMPORTANT
TO PROLONG LIFE EXPECTANCY
OF CYLINDER SEALS AND
PREVENT PREMATURE LEAKAGE
AND WEAR, RAISE LIFT TO FULL
HEIGHT AT LEAST ONCE A DAY.
ALSO, THIS IS AN EFFECTIVE
WAY TO BLEED ANY TRAPPED
AIR AND MAINTAIN EQUAL
LIFTING OF THE SYSTEM.
ATTENTION
TRÈS IMPORTANT
POUR PROLONGER L'ESPÉRANCE
DE VIE DES JOINTS CYLINDRES ET
PRÉVENIR LES FUITES
PRÉMATURÉES ET PORTEZ, ÉLEVEZ
LE PLEIN ÉLEVÉ HAUTEUR AU MOINS
UNE FOIS PAR JOUR.AUSSI, C'EST
UN EFFICACE FAÇON DE SAIGNER
TOUT PIÉGÉ AIR ET MAINTIEN ÉGAL
LEVAGE DU SYSTÈME.
PN 5905176
PN 5905176
PN 5905178 PN 5905179
PN 5905308
PN 5905940
PN 5905204
PN 5905307
Santa Paula, CA USA
www.bendpak.com
MODEL NUMBER
DESCRIPTION
LIFT CAPACITY
DANGER!
Disconnect Power
Before Servicing
PN 5905951
DATE OF MFG.
SERIAL NUMBER
UPC
VOLTAGE
110-120V, 50-60 Hz, 1 Ph
380-415V, 50-60 Hz, 3 Ph
208-240V, 50-60 Hz, 1 Ph
208-440V, 50-60 Hz, 3 Ph
WARRANTY VOID IF DATA PLATE IS REMOVED MADE IN CHINA
2019_Serial_Tag-B-5905951.pdf:
Size: 3”W x 3”H
Material:Material: 2 Mil. Matte Silver Polyester
(Flex-PSE)
Print using thermal transfer printer with resin
ribbon
Ink: 1 Color-Black
PN 5905951
Black & Yellow Hazard Roll
Size: 10’ W x 2” H
Material: Vinyl Adhesive / Backing:
Soft Polyvinyl Chloride
Thickness: 6.5 Mil
Finish: Matte Overlaminate (No
gloss)
Hazard Decals on left and right side of the platforms
PN 5930609
SIZE TO FIT LENGTH
PLACE ON BOTH SIDES PLACE ON BOTH SIDES
Lube_Warning.pdf:
Trim: 2”W x 1.75”H Custom Die Cut
Material: Yellow Adhesive Vinyl
Ink: 1 Color-Black