BendPak 5175151, Service Manual

Page: 5 / 25

DIMENSIONS ARE IN MM
☺
A
DETAIL A
SCALE 1 : 5
7
NEXT ASSEMBLY
5260675
5260676
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601797 MDS-6EX BASE WELDMENT 1 A
2 5601021 MDS-6 INNER SCISSOR WELDMENT 1 G
3 5600745 MDS-6 OUTER SCISSOR WELDMENT 1 J
4 5601533 MDS-6EX RAMP WELDMENT 1 A
5 5716202 MDS-6 SCISSOR BOTTOM SLIDE BLOCK 46mm 2 B
6 5716184 MDS-6 SCISSOR TOP SLIDE BLOCK 39mm 2 D
7 5746316 MDS-6 RAMP PIN 1 F
8 5601530 MDS-6 SCISSOR CLEVIS PIN WELDMENT 4 B
9 5535032 NUT M24 x 3.0 NL 2 --
10 5736890 MDS-6 SAFETY ROCKER ARM 1 B
11 5545005 WASHER, M6 x 12mm FLAT 2 --
12 5535357 NUT M6 x 1.0 NL 3 --
13 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 1 --
14 5530093 HHB M6 x 1.0 x 20mm 1 --
15 5530757 HHB M6 x 1.0 x 40 1 --
16 5505625 FEMALE ROD END M6 x 33 1 --
17 5600747 MDS-6 CYLINDER GUIDE WELDMENT 1 E
18 5215475
MDS-6 SERIES CYLINDER GUIDE ARM ROLLER ASSEMBLY
2 B
19 5505136 SPRING PIN M5 x 40 2 --
20 5746431 BEARING SPACER, Ø44 x Ø30 x 2 2 A
21 5502032 CYLINDER ASSEMBLY Ø3.0 x 7.5 2 J
22 5746700 MDS-6 SERIES CYLINDER GUIDE PIN, LARGE 1 C
23 5530374 SSS M8 x 1.25 x 16 EXTENDED NL 2 --
24 5550310 FTG TEE -04JIC -04JIC -04JIC 1 --
25 5550001 FTG NPL -04 COMP x -02 NPT 2 --
26 5550087 FTG ELB -04 COMP x -02 NPT 1 --
27 5756033 MDS-6 CYLINDER SEPARATOR 1 C
28 5570060
MDS-6 SERIES HYDRAULIC HOSE ASSY Ø6.35 x 254mm SB
2 D
29 5545001 WASHER 25mm x 37mm 2 --
30 5530031 HHB M6 x 1.0 x 12mm 6 --
WHERE USED
MDS-6EXT
MDS-6EXTF
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215969 03/09/2022 TM 01403
SHEET 1 OF 2
REV DWG. NO.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216122
MDS-6EX RAMP ASSEMBLY
03/10/2022
DO NOT SCALE DRAWING
1:15 SCALE:
THIRD ANGLE PROJECTION
OR 03/21/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
HOSES MUST BE ROUTED BEFORE PACKAGING 2.
HOSES SHOWN IN REPRESENTATIONAL FORM 3.
COIL EXCESS HOSE INSIDE RAMP FOR SHIPMENT 4.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 5.
ASSEMBLE ITEMS AS SHOWN 6.
5736890 MUST ROTATE FREELY 7.