Bender LINETRAXX VMD461, Manual

Page: 36 / 84

Operation and configuration
36 VMD461_D00314_01_M_XXEN/10.2018
5.2 Various displays
5.2.1 Standard display
In the standard display, the line-to-line voltages, the phase voltages and the
frequency are indicated on the display.
Fig. 5.1: Standard display
4
INFO
ESC
Standard display : Toggle between standard display and
device information
Menu display : Exit the parameter setting menu without
saving; switch to the next higher menu level
5
TEST
Standard display : Use the TEST button (< 1.5 s) to start a
manual self test which triggers both alarm relays (trigger
test to check the switches/disconnectors). In addition, the
switch-off times are documented, see "Manual self test"
on page 67.
Menu display : arrow-up button for parameter change
and scrolling
6
RESET
Standard display : (> 1.5 s) Acknowledge fault messages
from contact monitoring
Menu display : arrow-down button for parameter
change/scrolling
7
MENU
Standard display : Toggle between standard, menu and
alarm display
Menu display : button
Jump to setting parameter; save the changed parameters
L1-N 229.9V L1-L2 397.2V
L2-N 229.5V L2-L3 401.9V
L3-N 232.9V L3-L1 400.1V
f 50.00 Hz