Device communication
Device communication
isoHR685W-x-I-B_D00261_05_M_XXEN/12.2021
41
10.4.5 Parameter changes
10.4.5.1 Display of parameters in standard versions
Inputs are located horizontally (orange frame) and the corresponding parameters ver-
tically (blue frame). Currently set parameters are placed on the left side of the input field
in grey font (red frame) and also appear in the input field if no changes have been made.
Display of the present values in the browser (extract)
10.4.5.2 Display of parameters in the EDS menu area
If a list contains many entries (e.g. representation of channels in the EDS system), the
channels are placed vertically as a list (orange frame) and the corresponding parameters
horizontally (blue frame). Values highlighted in YELLOW represent the changes that have
not been accepted by the system yet.
Channel representation in the EDS menu
present values
without changes
with changes
10.4.5.3 Error detection in case of incorrect entry
In some cases, the system expects certain characters to be entered, for example, CAPITAL
LETTERS. In case of an incorrect entry, the corresponding field is coloured in RED.
Incorrect text input
10.4.5.4 Display of parameters with Modbus registers
A Modbus register is assigned to each parameter, which can be addressed via the open
interfaces Modbus TCP or Modbus RTU. The registers can be displayed with the respecti-
ve parameters by activating "
Tools" -> "Parameter addresses"
in the menu.
Activation of Modbus register display
After activation, all parameters with the corresponding Modbus registers are displayed.
Display of Modbus registers
