manualshive.com logo in svg

Bender ISOMETER isoHR685W Series, Manual

Share
Download
Bender ISOMETER isoHR685W Series Manual Download Page 38

Settings

Settings

isoHR685W-x-I-B_D00261_05_M_XXEN/12.2021

38

9.2

 (5.9) Factory settings

Resetting the device to factory settings. 

9.2

 (5.10) Software

9.2

  (5.10.1) Update via interface

This must be active if a SW update is to be transferred from the web interface to the de-
vice via a BUF file. 

9.2

  (5.10.2) Update

Starts the update process after the BUF file has been transferred to the device.

9.2

 (5.11) Service

Input Password 

9.2

 (6.0) Info

The ISOMETER®'s present settings can be viewed in the "Info" menu. Navigate through 
the different views using the   and   buttons:

•Update via interface

Activates the SW update via web interface.

•Update

Starts update on the device. Alternatively, the update can 
also be started via the web interface.

•Password

The Service menu can only be accessed by Bender Service staff.

•Device

Device name, serial number, article number

•Software

Software version measurement technology, software version HMI

•Measurement 
technology

Selected profile, selected system type

•EDS

PGH, Current, Mode

•Clock

Time, date, summer time

•Ethernet

IP address, DHCP status, MAC address

•RS485

BS bus address; Modbus RTU address, BS bus mode

Summary of Contents for ISOMETER isoHR685W Series







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands