16
User Instructions
Continued
NOTE: This is a thermostatic remote control. The remote should be in the same room as
fireplace and placed on a flat surface. It must be placed away from the fire so the hot
air will not blow on it and affect thermostatic reading.
The communication between the remote and appliance will already be established.
Please read page 23 “
Pairing the handset to the appliance”
to set it up if you can’t
operate the appliance with the remote.
Standby for Remote Handset
The screens shown below are when the remote handset is in standby mode.
Before Day / Time set up After Day / Time set up
Turn On / Off
Press to turn on the flame effect.
Press to turn off all the functions under the normal mode including flame effect and
heater fan.
Press to turn off the flame effect under daily and weekly timer mode.
Flame effect
Press to enter the flame effect adjustment screen.
Press the
‘←’
or
‘→’
button to select 1 of the 3 flame effect colours.
Press the
‘+’
or
‘-’
button to select 1 of the 5 brightness levels for the flame effect
Remote control operation
200788_1
