17
User Instructions
Continued
Fuel bed colour
Press to enter the fuel bed light adjustment screen.
Press the
‘←’
or
‘→’
button to cycle through the 13 colours of fuel bed
or the colour-cycle mode. Setting 14
Press the
‘+’
or
‘-’
button to select 1 of the 5 brightness levels
for the fuel bed and the OFF setting
Normal mode
Normal control mode is factory set. Or press
M
button until the logo shows up at the
upper right corner of the screen.
Press the
‘+’
or
‘-’
button to adjust the temperature setting from 17
℃
to 25
℃
(increments of 2
℃
)
Press button to turn on / off the heat, ON
、
OFF will show
at the lower right corner of the screen.
In order to prevent the product becoming too hot, there is a 10 second delay when
turning on the heater and a 10 second delay when turning off the heater fan.
Note: It is normal for the fan heater to stop running for periods of time.
This happens because the room temperature is at or above the temperature set on the
remote control.
The heater indicator will be turned off after 10s if you have the flame effect ON.
The heater indicator will stay ON if you use the heating function only and the flame
effect is OFF.
Timer function
Note: This setting is only for normal mode. It
allows the appliance to
be returned to Standby after a set period of time.
Press to cycle through the settings from Off, 0.5 hours to 9 hours.
The timer logo and time will show on the screen.
The heater can be automatically run by using daily timer and weekly
timer on the remote.
Weekly / daily timer and comfortable temperature setting
Press to turn on the remote handset.
Hold the
M
button for 3 seconds to enter the setting screen.
Press the
‘←’
or
‘→’
button to choose day, time or comfortable temperature.
The selected character will be highlighted
Press the
‘+’
or
‘-’
button to adjust the number
Time: 24-hour system
Select your comfortable temperature from 15-25
℃
.
Temperature unit:
℃
、
℉
Remote control operation
200788_1
