7
Installation
–
Fire Preparation
continued…….
200820
Diagram 2
(LH Side
Shown)
Diagram 3
(RH Side
Shown)
The fire comes out the box, set up for a 1 sided
installation.
Remove the
Side Panels,
by removing the
14 x Screws
securing the left and right handed
Side Panels
on the
fire and place the
14 x Screws
safety to one side as
these will be required later during the installation.
See Diagram 2.
Note: The Side Panels removed from the fire are no
longer required and can be discarded or kept
somewhere safe should you require them in the
future.
Locate:
2 x Support Brackets - (LH/RH)
2 x Horizontal Side Trim - (LH/RH)
2 x Vertical Side Trims - (LH/RH)
Note: These are boxed separately with the surround.
Box A.
Using the
14 x Screws
previously removed, fix the
supplied brackets to the fire, using
7 x Screws
per side.
See Diagram 3.
RH
-Support
Bracket
RH- Vertical
Side Trim
RH-
Horizontal
Side Trim
Depending on the model purchased:
050164
–
(1000-3SL) - remove the 2 x Brackets
attached to the base of the fire, place the
4 x Screws
safety to one side, as these will be required later during
the installation.
See Diagram 4.
050172
–
(1250-3SL) - remove the 3x Brackets
attached to the base of the fire, place the
6 x Screws
safety to one side, as these will be required later during
the installation.
See Diagram 4.
Note: The brackets removed from the fire are no
longer required and can be discarded or kept
somewhere safe should you require them in the
future.
