9
6.
OPERATING INSTRUCTIONS
WARNING! Do not operate the appliance if it is damaged or has malfunctioned.
If you suspect the appliance is damaged or has malfunctioned call a qualified
service engineer to inspect the appliance, and replace any part of the electrical
system if necessary, before reuse.
WARNING! To reduce the risk of fire, keep textiles, curtains, or any other
flammable material a minimum distance of 1 meter from the air outlet.
MAKE SURE
the plug fits tight in the outlet. Faulty wall outlet connections or
loose plugs can cause the outlet to overheat.
Do not
disconnect the power at the mains supply whilst the appliance is running.
Use the functions on the remote to turn the fire off and ensure the mains switch
has been moved to the off position before disconnecting.
PREPARATION FOR USE
6.1 The appliance can be operated by both remote control and the manual
controls on the appliance.
NOTE: To use either the remote or the manual functions the main on / off
switch must be in ‘ON’ position.
In order to prevent the product becoming too
hot, there is a 10s delay when turning on the heater and a 10s delay when
turning off the heater fan.
Batteries
Ensure that the handset batteries are new and inserted correctly.
Main Power Switch
6.2 The mains power switch is located on the control panel locating on the right-
hand side of the heater box.
6.3 Switch ON before operating either the remote or manual controls.
6.4 A long beep is heard to indicate the fire is ready for use.
Summary of Contents for 2100
Page 10: ...8 Model 2606 ...
